Steam Heating Cardboard Making Machine -3 Ply Corrugated Carton Production Line

Steam Heating Cardboard Making Machine -3 Ply Corrugated Carton Production Line

main technical parameters and requirements in production line

• The maximum production width of the corrugated cardboard:1800mm

• Design speed:100m/min

• Economic speed:60-80m/min

note:Production line speed test paper should meet the following requirements:(the surface temperature of the equipment is not less than 172℃)

﹡Paper rating of not less than B grade ﹡Paper moisture content of about:11%±2%

﹡top paper:100—250g/m2 ﹡core paper:100--250g/m2

﹡corrugated paper:100—200g/m2

• Flute-type combination:A ,C, B, E(as customers’ requirement)

• Steam the necessary requirements:

﹡amount of steam 2500—3000Kg/Hr ﹡the highest pressure:1.2MPa

﹡common pressure:0.8-1.1MPa

Customer-owned section

1,steam heating system:proposal with 2000Kg / Hr of a steam boiler pressure:1.25MPa steam pipeline.

2,air compressed machine,air pipeline,glue conveying pipe.

3,power supply,wires connected to the operation panel and line pipe.

4,water sources,water pipelines,buckets and so on.

ZJ-F shaftless mill roll stand

Structural features:

★Symmetrical structure can also install two bundles of paper at the same time,Paper can be used for non-stop for a job；Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.

★each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car；paper guide the use of channel 14 and the guide post weld,paper car adopt 10mmwelded stell,the length of track is 4500mm.

Mainly purchased parts, raw materials and origin:

SF-280S fingerless type single facer

Structural features:

★Adopt vacuum suction structure, with high pressure strong blower.Suction with silencer.Gas supply and electrical control cabinet to focus on the same operation cabinet,not less than 1.5 meters away from the host,Fully enclosed full operation side.

★base and wallboard cast iron wall,Wallboard thickness130mm.universal Joints.

★corrugated roller material adopt 48CrMoalloy steel,quenched,Laser hardening,Surface finish,main roll of corrugated diameter¢ 280mm,surface hardnessHRC60degree above.The key parts of the tile and pressure roller bearings Wafangdian produce high temperature bearings.

regular technical parameters:

1,effective width:1800mm 2,operation direction:left or right(determined in accordance with customer plant)

3,design speed:100m/min 4,temperature range:200—260℃

5,corrugated flute:(UV type or UVV type)