|
Product Details:
|
| Voltage: | 380V/50HZ, 220v/380v/440v | Condition: | New Corrugated Cardboard Peoduction Line |
|---|---|---|---|
| After-sales Service Provided: | Engineers Available To Service Machinery Overseas,Online Support | Automatic Grade: | Fully Automatic |
| Usage: | Corrugated Cardboard Production Line | Packaging Type: | Plastic Film |
| High Light: | Corrugated Cardboard Machinery,Corrugated Paperboard Production Line |
||
main technical parameters and requirements in production line
type:YK150-1800-Ⅱtype five layer corrugated paperboard production line:
| 1 | Effective width | 1800mm | 2 | Design produce speed | 150m/min | |||
| 3 | Three layer work speed | 100-140m/min | 4 | Five layer work speed | 90-130m/min | |||
| 5 | Seven layer work speed | ------------------- | 6 | The highest change single speed | 100m/min | |||
| 7 | Longitudinal separation accuracy | ±1mm | 8 | Cross-cutting precision | ±1mm | |||
|
note |
Speed the above targets required to achieve:effective width1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ℃ heating surface temperature. | |||||||
| Top paper index | 100g/㎡--180g/㎡ Ring crush index(N.m/g)≥8 (Water containing8-10%) | |||||||
| Core paper index | 80g/㎡--160g/㎡ Ring crush index(N.m/g)≥5.5 (Water containing8-10%) | |||||||
| In paper index | 90g/㎡--160g/㎡ Ring crush index(N.m/g)≥6 (Water containing8-10%) | |||||||
| 9 | Flute combination | |||||||
| 10 | Steam requirement | The maximum pressure 16kg/cm2 | Common pressure10-12kg/cm2 | use4000kg/Hr | ||||
| 11 | Electricity demand | AC380V 50Hz 3PH | Total power≈220KW | Running Power≈150KW | ||||
| 12 | Compressed air | The maximum pressure 9kg/cm2 | Common pressure4-8kg/cm2 | use1m3/min | ||||
| 13 | space | ≈Lmin70m*Wmin10m*Hmin5m(The actual drawing to provider to provide audited prevail) | ||||||
|
Customer-owned section
|
|
1, steam heating system:proposal with 4000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.
|
| 2, air compressed machine,air pipeline,glue conveying pipe. |
| 3, power supply,wires connected to the operation panel and line pipe. |
| 4, water sources,water pipelines,buckets and so on. |
| 5, Water, electricity, gas flush mounting civil foundation. |
|
6, Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.
|
| 7, Oil equipment,lubricating oil,hydraulic oil,lubricating grease. |
ZJ-V5B hydraulic shaftless mill roll stand
structural feature:
★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time
technical parameters:
1,the range of clamping paper:MAX1800mm MIN1000mm
2,clamping diameters:MAX￠1500mm MIN￠
350mm 3,main shaft diameter of paper holder:￠240mm
4,gas source work pressure(Mpa):0.4---0.8Mpa
※Hydraulic system parameters:
3.Clamping hydraulic cylinder:￠63×1300m 4.hydraulic station motor power:3KW --380V -- 50Hz
5.solenoid valve voltage:220V 50 Hz
SF-320E multi-cassette single facer
structural features:
★main flute roller:￠320mm(according flute differ),pressure roller￠370mm,preheat roller￠400mm.
★using negative pressure type design, low heat loss,helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.
★quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugating with motor drive,put into the machine,fixed to the machine base,only need a few buttons can complete the replacement quickly and easily.
★corrugated roll adopt 48CRMO high quality alloy steel,dealing with heating, after grinding hard chrome plating surface treatment.
★corrugated roll and pressure roll adopt the airbag control system with high stability, at the same time with pneumatic control buffer effect.
★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted.
★the moveable type glue unit is convenient to clean and maintain.
★easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly.
★built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture.
★main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly.
technical parameters:
1,effective width:1400mm 2,operation direction:left or right(Determined in accordance with the customer's facility)
3,design speed:150m/min 4,temperature range:160—200℃
5,air source:0.4—0.9Mpa 6,steam pressure:0.8—1.3Mpa
7,corrugated flute:(UV type or UVV type)
※roller diameter parameters:
1,diameter of up corrugated roller: ￠320mm 2,diameter of pressure roller:￠269m
3,diameter of glue roller:￠268mm 4,diameter doctor roller :￠153mm
Contact Person: Tina Wang
Tel: +8615832127958
