|
Product Details:
|
| Machinery Test Report: | Provided | Voltage: | 380v50hz (customization) |
|---|---|---|---|
| Type: | Packaging Line | Automatic Grade: | Automatic CorrugatedCardboard Production Line |
| Driven Type: | Electric | Marketing Type: | New CorrugatedCardboard Production Line |
| High Light: | Corrugated Cardboard Machinery,Corrugated Paperboard Production Line |
||
main technical parameters and requirements in production line
|
1 |
Effective width |
1800mm |
2 |
Design produce speed |
150m/min |
|||
|
3 |
Three layer work speed |
100-140m/min |
4 |
Five layer work speed |
90-130m/min |
|||
|
5 |
Seven layer work speed |
------------------- |
6 |
The highest change single speed |
100m/min |
|||
|
7 |
Longitudinal separation accuracy |
±1mm |
8 |
Cross-cutting precision |
±1mm |
|||
|
note |
Speed the above targets required to achieve:effective width1800mm,Comply with the following standards and ensure the paper's equipment condition 175 ℃ heating surface temperature. |
|||||||
|
|
Top paper index |
100g/㎡--180g/㎡ Ring crush index(N.m/g)≥8 (Water containing8-10%) |
||||||
|
|
Core paper index |
80g/㎡--160g/㎡ Ring crush index(N.m/g)≥5.5 (Water containing8-10%) |
||||||
|
|
In paper index |
90g/㎡--160g/㎡ Ring crush index(N.m/g)≥6 (Water containing8-10%) |
||||||
|
9 |
Flute combination |
|
||||||
|
10 |
Steam requirement |
The maximum pressure 16kg/cm2 |
Common pressure10-12kg/cm2 |
use4000kg/Hr |
||||
|
11 |
Electricity demand |
AC380V 50Hz 3PH |
Total power≈220KW |
Running Power≈150KW |
||||
|
12 |
Compressed air |
The maximum pressure 9kg/cm2 |
Common pressure4-8kg/cm2 |
use1m3/min |
||||
|
13 |
space |
≈Lmin70m*Wmin10m*Hmin5m(The actual drawing to provider to provide audited prevail) |
||||||
ZJ-V5B hydraulic shaftless mill roll stand
※structural feature:
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
※technical parameters:
1,the range of clamping paper:MAX1800mm MIN1000mm
2,clamping diameters:MAX￠1500mm MIN￠
350mm 3,main shaft diameter of paper holder:￠240mm
4,gas source work pressure(Mpa):0.4---0.8Mpa
Mainly purchased parts, raw materials and origin:
|
Name of main parts |
Brands or place of origin |
material |
|
Main shaft |
Day steel production |
diameter242mm |
|
Swing arm |
Production by own |
Resin sand gray ironHT200 |
|
wallboard |
Jigang prduction |
Q235AWelding parts |
|
bearing |
HRB,ZWZ,LYC |
|
|
Toothed chuck |
Zhejiang xusheng |
3,4inch shared |
|
Main electrical appliance |
France Schneider |
|
|
button |
CHINT NP2series |
|
|
Air switch |
French Schneider |
|
|
Pneumatic components |
Zhejiang Sonor CSM |
|
|
Hydraulic station |
Shandong zaozhuang |
|
|
Brake pump |
zhejiang |
|
Contact Person: Tina Wang
Tel: +8615832127958
