|
Product Details:
|
| Type: | Conveyor Belt | Material: | 100% Woven |
|---|---|---|---|
| Standard Or Nonstandard: | Standard Corrugator Belt | Application: | Machinery & Hardware |
| Thickness: | 9mm | Product Name: | Corrugated Cardboard Belt |
| Name: | Corrugator Belt | Condition: | New Corrugator Belt |
| Width: | 1600-2800mm | Packaging Type: | Standard Packing |
| High Light: | 9mm thick woven corrugator belt,double facer corrugator belts,9mm thick woven corrugator belt |
||
Woven Type Corrugator Belt For Corrugation Line
I: Introduction
Common edge woven type Corrugator belt also named Corrugated board conveyor belt.
Common edge Corrugator belt is for the Lower speed of corrugated board production line.
II: Corrugator Belt Seam
1: USA Fastener clipper With Rubber
2: Hot Jaw Lacing
III: Technical Specifications:
| Type | YKC-Common edge | |
| Thickness | (9±0.30)mm | |
| Width | (1600-2800)mm | |
| Heat-resistance | 240℃ | |
| Tensile strength | 75Mpa | |
| Coefficient of friction | ≥0.4u | |
| Weight per unit | (7.5 ± 0.3)kg/m2 | |
| Air-permeability | 2.2m3/m2min. | |
IV: Products Features
| Tensile strength | Warp direction (63-75) Mpa in dry mode |
| Heat resistance | Raw materials are polyester synthetic fiber, softening point≥260ºC |
| Moisture absorption | Quick absorption and emission of heat, therefore cardboard can be quickly dried |
| Seams | Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking |
| Suitability | Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode. |
| Geometrical dimension | Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard. |
| Service life | As long as the same products imported abroad. |
CHINA YIKE GROUP CO.,LTD
Email: anna@yikegroup.net
Whatsapp: +8613363699514
Contact Person: Ms. Anna Tang
Tel: 008613363699514
Fax: 0086-317-5535033
