Carton Box 3 Phaze Flexo Printer Slotter Machine Low Noise 50hz

Printer Slotter Die Cutter Machine

Main Technical Parameters

ü Can measure the corrugated cardboard thickness, can adjustment feeding gap automatic

ü 7.5KW high-pressure centrifugal fans, according to the cardboard

warping degree of the frequency control pressure, to ensure warp

cardboard or thin cardboard high-speed accurate transmission.

ü Left and right side baffle position electrically adjustable,

screw-driven. and can remember by computer.

ü Front baffle adjust the position of the upper and lower intervals

synchronization by manual.

ü Skip-feeding devices, could select skip-feeding according to needs. To ensure that large-scale cardboard can also be processed.

ü Install 7” touch screen, could automatically display the

production quantity, production speed, and set the production quantity and every operation.

ü Slotting part is equipped with an interlock switch, to achieve the

emergency stop, stop feeding or feeding.

Machine Separation & Combination

ü Button switches electrically control the separation and combination

of machine, with automatic alarm device, continuously alarm while moving, to ensure the safety of operators.

ü Air pressure interlocks, lock securely, conveniently, and accurately.

ü Machine clutch drive shaft is equipped with an overload protection device.

ü Active self-locking function: if the unit is not completely locking state,

the host cannot start, to ensure the safety of machine and operator;

while hosting normal working conditions, the unit clutch function is automatically locked, to avoid machine misuse and personal injury.

Dust-removal System

ü Adopt brush cleaning device, equipped with strong Negative pressure suction fan, clearing the dust, paper scrap or other waste, to improve printing quality.

Feeding Roller: Feeding Roller

ü Upper feeding roll adopts outer diameter φ156mm rubber roller,

elastic buffer wear rubber (inside soft, outside hard), dynamic balance correction, to ensure smooth and accurate feeding.

ü Lower feeding roller adopts embossed rollers, hard chrome-plated, wear and smooth.

ü According to cardboard thickness, adopt worm gear box gap tuning, with locking device. Adjustment range 0-12mm

※Slotting Unit

• Angle cutter made by ITALY model, cutting ring use Rubber materials
• Computer auto-control cardboard size by Linear guideway
• 6 shaft with rubber pre-creasing, creasing, slotter
• The first pressure line round, after preloading cardboard not easily crush
• The above press round Urethane appearance package, will not damage the cardboard
• The slotter knife stock use a traverse mechanism, screw with linear guide, to move more flexible and precise

※Die-cutting Unit

• Rubber roller mechanical spiral commutation 40mm move about horizontal structure
• Die-cutter phase, computer and electric digital control
• Horizontal phase, computer and electric digital control, range ±5mm
• Rubber roller and die roller gap use computer and electric digital control,