|Name:||Flexo Printer Die Cutter Machine||Max Working Speed:||200 Pcs/min|
|Max Board Size:||1200/2600||Standard Plate Thickness:||4-7.2mm|
|Main Motor Power:||22 Kw||Max Printing Size:||1200/2400|
|Overprint Accuracy:||≤±0.5mm/Unit||Maximum Die Area:||1200mmx2400mm|
flexo printing and die cutting machine,
flexo printer slotter die cutter
YIKE Corrugated Carton Box Machine, Automatic High Speed 200pcs/min Ink Printing Die Cutting With Slotting Machine
Functional configuration and technical parameters
First, the machine performance:
1. This machine is composed of paper feeding, printing, slotting and die-cutting. It can complete the printing, pressing, slotting, chamfering and punching of three-layer and five-layer corrugated cardboard at one time.
2. The transmission system adopts large helical angle helical gear transmission, which has low noise, enhances the strength of the gear and improves the transmission stability of the gear. All transmission gears are made of 20crMnTi alloy steel, fine grinding, super hard processing, closed spray lubrication, and long-term guarantee of machine transmission accuracy.
3. Each unit is electrically connected and equipped with an alarm bell. When the clutch is engaged, the bell is continuously alerted to ensure the safety of the operator. The clutch motor has a constant torque clutch that can buffer the collision of each unit during the wrong operation.
4. After each unit is closed, each group is pneumatically locked and equipped with a total locking device, which can make the units and the bottom rail lock together. When the cylinder is not locked, the main motor cannot start running; when the main motor is running, the locking cylinder cannot be opened. After the units are separated, the transmission system automatically brakes to keep the original position of the gears fixed.
5, each unit has an automatic zero system, try to send a small amount of cardboard to adjust to the correct size, reduce cardboard waste.
6. The whole machine is beautiful in appearance and soft in color. The operating side is made of high quality stainless steel. The modular design allows you to increase or decrease each unit.
7. The bearing adopts famous brand bearings produced by well-known domestic manufacturers such as NSK, Harbin and Wanxiang.
8. The main motor uses a variable frequency motor.
9, contactors, relay buttons, etc. are used domestic well-known brands Chint, Schneider low-voltage electrical appliances.
10. Pneumatic original parts: The cylinder adopts Taiwan Yadeke brand-name cylinder, and the solenoid valve adopts Taiwan “Yadeke” brand-name products.
11. This machine adopts keyless connection to ensure connection accuracy and reliability.
12. The processing technology of parts feeding, printing, slotting and die cutting of the machine.
Side wall panel casting - artificial aging treatment - coarse planing - fine planing - large-scale machining center overall precision processing - quality inspection - storage
Gear: Forging - rough car - quenching and tempering - finishing car - hobbing processing - heat treatment - fine grinding of inner hole and plane - high-precision grinding machine grinding gear processing - special gear detector inspection - - Quality inspection - storage
Shaft type: roughing the inner hole of the roughing tube (welding shaft head) - welding the first shaft - roughing the outer circle - doing static balance - welding the second shaft - annealing treatment - finishing car - Doing dynamic balance - rough grinding - fine grinding - hard chrome plating - quality inspection - storage.
Second, the computer control operation department
The paper feeding unit, printing unit, slotting unit and die cutting unit are all controlled by PLC man-machine interface.
1. Memory zero (wiping memory): If the machine needs to open the machine for wiping or a small amount of plate changing during the working process, the original position can be automatically restored after the machine is closed.
2. Controllable anilox roller lifting: When a certain group does not need to print temporarily, it can be controlled that the anilox roller does not need to be lowered, so that the ink roller is not needed to be cleaned.
3, position to zero: the whole machine can be zeroed in the plate position, so that the plate position can be in place at one time.
4. The phase motor of the whole machine adopts frequency conversion speed regulation, with brakes to ensure the color registration accuracy and the speed of changing the order.
Third, the main technical parameters Model
1. Mechanical inner width: 2800mm
2, the highest production speed: 200 sheets / minute
3. Economic production speed: 180 sheets / minute
4, the largest paper size: 2600mm × 1200mm
5, sheet feed size: 2600mm × 1400mm
6, the largest printing area: 2400mm × 1200mm (hanging version)
7, standard plate thickness: 4-7.2mm
8, overprinting accuracy: ≤ ± 0.5mm / group
9, the largest die cutting area: 2400mm × 1200mm
10, the main motor power (kw): 22 (four colors)
11, the total power of the machine (kw): ≈ 30-50
Contact Person: Anna YIKE GROUP