|Name:||Flexo Printer Slotter Machine||Max Working Speed:||180 Pcs/min|
|Max Board Size:||1400/2600||Standard Plate Thickness:||4-7.2mm|
|Main Motor Power:||22 Kw||Max Printing Size:||1400/2400|
|Overprint Accuracy:||≤±0.5mm/Unit||Total Machine Power:||≈30-50 Kw|
flexo printing and die cutting machine,
flexo printer slotter die cutter
YIKE Group 150Pcs Speed Automatic Flexo Printer Computer Slotter Machine
Main mechanism performance characteristics
First, the paper feeding department (a group)
1, Machine clutch
1) The electric control unit is separated and attached with an alarm bell, and a bell warning is given during the operation to ensure the safety of the staff.
2) Pneumatic interlocking device is adopted between each unit, which is firm and convenient.
3) Each unit is equipped with opening and closing and locking button switches, which can realize the opening and closing and locking of the unit in any unit, which makes the operation simpler, more convenient and faster.
4) The clutch clutch shaft of the unit is equipped with a friction clutch to avoid damage to the machine due to misoperation.
5) Install the total locking mechanism of the unit to ensure smooth and accurate operation of the machine.
6) The host self-locking function, when the unit is not fully locked, the host can not be started to ensure the safety of the operator and the machine; when the host is working normally, the unit clutch function is automatically locked and does not work, avoiding the misoperation Unnecessary injury and damage to people and machines.
2, Leading edge paper feeding system
1) It can transport rigid cardboard and E Flute three-layer board.
2) High-pressure centrifugal fan suction auxiliary paper feeding, according to the degree of bending of the paperboard, the air volume can be adjusted to ensure smooth paper feeding.
3) The left and right positions of the side fences are electrically adjusted and driven by the motor and the lead screw.
4) The front and lower baffle gaps are manually adjusted synchronously, and there is an automatic locking device. After the adjustment is completed, it is automatically locked.
5) The position of the tailgate is electrically adjusted, and the adjustment is simple and quick.
6) Separate sheet feeding device (continuous or sheet feeding can be selected as needed) to determine the processing of large-size cardboard.
7) The planned production quantity can be set. When the plan is completed, the system automatically instructs to stop feeding and send a warning signal. The paper feeding unit is equipped with PLC and 10-inch color touch screen, which displays the phase setting of printing, slotting and die-cutting, and can set and display the production quantity to single alarm.
3. Vacuum cleaner
1) Brush dust removal device can remove dust on the surface of the cardboard and improve the quality of the printing plate.
2) Another vacuum fan is installed to remove the fine dust and other debris on the cardboard to determine the printing quality of the cardboard.
4, paper feed roller
1) The upper roller of the paper feed is a rubber roller (φ154mm).
2) The upper roller of the paper feeding adopts a seamless steel roller to wrap out the wear-resistant rubber and perform dynamic balance correction, which can play an elastic buffering function to avoid crushing the cardboard and waste of misuse.
3) The surface of the paper feeding rubber shaft is provided with grooves to minimize the pressure and avoid the damage of the corrugated board.
4) The lower roller of the paper feeding adopts the surface knurled steel roller, hard chrome plated, and the dynamic balance is corrected to increase the paper feeding friction.
5) The gap of the paper feed roller is manually adjusted, the dial is displayed, the adjustment range is 1-12mm, and there is a self-locking device. After the adjustment is completed, it is automatically locked, and the adjustment is simple and convenient.
Second, the printing department (four colors four groups):
1, Printing roller
1) Printing roller φ465.6 (including plate diameter φ480)
2) Steel plate material, surface grinding, hard chrome plating.
3) Dynamic balance correction, smooth operation. Suitable for high speed operation.
4) Ratchet fixed coil shaft can realize quick change of plate.
5) Full-hanging type hanging plate ditch, suitable for 9mm hanging slats.
6) When loading and unloading the printing plate, the electric control of the foot switch is reversed, and the plate changing is simple and fast.
7) Printing phase adjustment: Planetary gear structure, the printing roller is equipped with automatic zero return device, and is controlled by PLC and 7 inch touch screen. Click to enter the plate roll phase adjustment interface. With automatic zero, automatic version (wiping memory) and preset printing position and other functions.
8) Printing phase fixing device, pneumatic brake device, when the unit is clutched, the brake will automatically lock, keep the original gear position unchanged, and automatically open after the machine locks.
9) Wipe the memory function, automatically reset after cleaning the plate, convenient and fast.
10) The axial adjustment is manual adjustment, and the adjustable distance is 10mm for each side.
(Optional axial adjustment for electric adjustment)
2, Embossing roller
1) The outer diameter of the stamping stick is φ154mm, which is welded by double disc.
2) Surface grinding, hard chrome plating.
3) Balance correction and smooth operation.
4) Manual adjustment of the gap of the embossing roller, the adjustment range is 1-12mm, and the cross slider is used for connection. When adjusting, the transmission gear will always ensure the correct position.
3, Anilox roller
The surface of the metal anilox roll is hard chrome plated, and the cable is 180-250 lines/ optional
(Optional ceramic anilox roller, cable 300-750 line / optional)
1) The outer diameter of the anilox roll is φ215 mm.
2) Produced by professional manufacturers, the outlets are consistent, and the ink is even.
3) The anilox roller gap dial shows manual adjustment, the adjustment range is 1-8mm, and the cross slider is used for connection. When adjusting, the transmission gear will always ensure the correct position to engage.
4) Pneumatic lifting net roller prevents the ink from drying out when the printing plate is repeatedly inked and the machine is stopped for a short time.
4, (1) Rubber roller (can be equipped with metal anilox roller, ceramic anilox roller assembly)
1) The outer diameter of the rubber roller is φ200mm, which is made by professional manufacturers.
2) The surface of the steel roller is wrapped with excellent wear-resistant rubber. The surface of the rubber roller is high in the middle, which can compensate the force deformation, improve the ink transfer effect and ensure uniform ink.
3) With automatic ink leveling device, it can realize the function of stopping and stopping ink.
4) Manual clearance adjustment with self-locking function to ensure uniform inking.
(2) Scraping cavity (with ceramic anilox roller assembly)
1) It is made by Guangzhou Kerou Machinery Equipment Co., Ltd.
2) Innovative chamber fluid dynamics and ink seal design, good ink transfer effect, more energy saving.
3) Air pressure or cylinder adjustment lock, scraper wear automatic compensation, so that the anilox roller and the squeegee fit better to obtain the best squeegee effect.
4) All-round installation design can replace any old-fashioned rubber roller or single scraper system.
5, Ink system
1) Ink is applied by pneumatic diaphragm pump, the ink supply is stable, and the operation and maintenance are simple.
2) Insulate the cup to prevent ink splashing and venting.
3) Stainless steel ink fountain, automatic circulation cleaning and automatic inking.
6, Paper guide roller
1) The upper paper guide roller has a shaft diameter of 85mm. After two grinding processes, the surface is plated with hard chrome to make the guide roller move easily and smoothly.
2) The lower paper guide roller has a shaft diameter of 154mm. After two grinding processes, the surface is plated with hard chrome to make the paper guide more accurate.
3) Manual adjustment of the paper guide roller gap, the adjustment range is 1-12mm, and the cross slider is used for connection. When adjusting, the transmission gear will always ensure the correct position.
Third, the linear guide groove (optional multi-screw or single screw ESC):
1. Pressure roller
1) The pressure roller is processed by two grinding processes, and the surface is plated with hard chrome to make the pressure roller move easily and smoothly.
2) The pressure line wheel adopts high quality imported polyurethane to effectively prevent damage to the cardboard.
3) Manual adjustment of the gap of the pressure roller, the adjustment range is 0-12mm.
2, Slotted tool holder traverse adjustment mechanism
1) The upper and lower shaft diameters of the slotting cutter are φ155mm. After two grinding operations, the surface is plated with hard chrome and the movement is stable.
2) Slotting knife width 7mm, manufactured by professional manufacturers.
3) Alloy tool steel material is heat treated and ground toothed slotting cutter with good hardness and toughness.
4) The alloy steel material is heat treated, and the edge trimming knife is sharpened with sharp edges and high precision.
5) The position of the pressure roller and the slotted tool holder are traversed, and the electric synchronous control is adopted.
6) The slotted box height is electrically adjusted, which is convenient and fast.
7) The unique elastic chip removing device has low cost and long service life.
8) With automatic discharge device.
9) Manual adjustment of the upper and lower cutter shaft clearances, the adjustment range is 1-12mm, and the cross slide is used for connection. When adjusting, the transmission gear will always ensure the correct position.
3. Slotted phase adjustment mechanism.
1) Planetary gear 360 degree positive and negative adjustment makes adjustment more convenient, fast and accurate.
2) Before and after slotting, the phase of the knife is controlled by touch screen and electric button and the electric digital 360 degree adjustment (stop and dynamic can be adjusted).
4, Slotted computer operation control
1) The slotted part is equipped with PLC and 7-inch color touch screen to realize man-machine dialogue. Through the PLC, various order sizes and storage orders can be set. The set orders are directly called next time, and the slotting cutter is automatically reset to allow operation. It's simpler, more convenient and faster.
2) Automatic zeroing device to ensure that the unit has a unified adjustment standard to reduce the waste of cardboard.
3) Safety limit device to ensure that the machine will not be operated by mistake.
Contact Person: Anna YIKE GROUP